FMA-CBL (Cables)#

FMA-FC-150/60-V1: Flex Cable for MIPI CSI-2 Connections#

  • FSA to FPA for MIPI CSI-2 connections (mandatory)

  • Extension through “daisy-chaining” possible (maximum length is sensor and setup dependent)

  • Rigid-flex design (connectors on rigid PCBs)

Note

Don’t use for any other connections than MIPI CSI-2. It might lead to signal degradation and even permanent damage!

Flex Cable Connectors

  • FSA Side: Hirose DF40C-60DS-0.4V

  • FPA Side: Hirose DF40C-60DP-0.4V

  • Pin Assignment: Pin 1 to Pin 1

Mechanical Drawing

../../../_images/FMA-5s.svg

Top Side#

../../../_images/FMA-6s.svg

Bottom Side#

FMA-FC-150/60-LVDS-V1: Flex Cable for Sub-LVDS, SLVS and SLVS-EC Connections#

  • FSA to FPA for Sub-LVDS, SLVS and SLVS-EC connections (mandatory)

  • Extension through “daisy-chaining” possible (maximum length is sensor and setup dependent)

  • Rigid-flex design (connectors on rigid PCBs)

Note

Don’t use for MIPI CSI-2 connections. It might lead to signal degradation and even permanent damage!

Flex Cable Connectors

  • FSA Side: Hirose DF40C-60DS-0.4V

  • FPA Side: Hirose DF40C-60DP-0.4V

  • Pin Assignment: Pin 1 to Pin 1

Mechanical Drawing and Pinout

../../../_images/FMA-7s.svg

Top Side#

../../../_images/FMA-8s.svg

Bottom Side#