Toradex Verdin Devkit#
Introduction#
This Quick Start Guide (QSG) provides an overview of the FPA-A/P24-Kit, a hardware interface for FRAMOS Sensor Modules (FSM:GO, FSM:FSA) to connect with carrier boards. The kit is compatible with the Toradex Verdin Mallow and Dahlia family of carrier boards.
The guide includes:
An introduction to the hardware components involved.
Reference to the official Toradex Quick Start Guide for software setup and additional configuration steps.
Hardware Components#
The FPA-A/P24-Kit includes the following components:
FPA-A/P24-V1: Processor Adapter with PixelMate™ connector.
FMA-CBL-FFC24-0.2m: 24-pin FFC cable (200mm) for connecting the processor board.
FMA-CBL-MPB125-150/5: Synchronization cable for multiple sensor modules.
FMA-CBL-MPB125/FL-150/6: I/O cable for GPIO connections.
FMA-SCW/01-KIT: Screws and spacers for stacking FSM/FFA modules.
For detailed component descriptions, refer to the Product Datasheet.
Software & Setup Guide#
To set up the FPA-A/P24-Kit and connect it to the Toradex carrier board, follow the official Toradex Quick Start Guide:
This guide covers:
Connecting the sensor module.
Installing required software and drivers.
Running sample applications for image capture.
For any additional support, refer to the FRAMOS FSM Documentation.