FMA-MNT (Mechanicals)#

FMA-MNT-CCS/260-V1: C/CS-Mount for 26.5mm Footprint#

../../../_images/FMA-1s.png

CS-mount body delivered with 5mm CS- to C-Mount extension ring.

  • Lens Thread: 1-32 UN 2A

  • Extension Ring: CS- to C-Type, BFD + 5 mm

  • Material: AlMgSi0.5

  • Finish: Black Anodizing

  • Optical Filter: Not applicable


Technical Drawing

image2

Figure: CS-Mount Body for 26.5 mm FSM

Note: The sensor specific distance of the active pixel layer to PCB and different types of sensor cover glasses might require adding a number of 0.1 mm distance rings to raise the flange height. Appropriate spacers or extension rings are not provided with the lens mount. All FSMs delivered with this mount applied are adjusted accordingly to meet the correct back focal distance by C- and CS-Mount standard using thin foils between mount and PCB.

FMA-MNT-CCS/280-V1: C/CS-Mount for 28mm FSM Footprint#

../../../_images/FMA-3s.png

CS-mount body delivered with 5mm CS- to C-Mount extension ring.

  • Lens Thread: 1-32 UN 2A

  • Extension Ring: CS- to C-Type, BFD + 5 mm

  • Material: AlMgSi0.5

  • Finish: Black Anodizing

  • Optical Filter: Not applicable


Technical Drawing

image4

Figure: CS-Mount Body for 28 mm FSM

Note: The sensor specific distance of the active pixel layer to PCB and different types of sensor cover glasses might require adding a number of 0.1 mm distance rings to raise the flange height. Appropriate spacers or extension rings are not provided with the lens mount. All FSMs delivered with this mount applied are adjusted accordingly to meet the correct back focal distance by C- and CS-Mount standard using thin foils between mount and PCB.